hi, needing to R&R bushing 76 300D/w115 on the front control arms but the clearance looks tight to remove the top bolts. Not sure if lower sub-frame (those bushing are good) needs to be lowered for clearance. Any ideas before I tackle this would be appreciated

Sal
Atlanta, GA

Peeking at the factory manual, it doesn't say to lower the sub-frame. I rebuilt my entire front end almost 10 years ago so I don't recall

__________________
63 220S W111
76 300D W115
2013 VW JSW TDI M6

previously-
73 280 SEL 4.5
86 300E 5 speed
2010 VW Jetta TDI M6