|
|
|
#1
|
|||
|
|||
M117 fuel injection hose questions
I need to change out the fuel lines around my injection manifold. The kits offered seem like an expensive way to go vs buying bulk hose and cutting to size.
I have 2 questions, 1) Are the hose lines in question 7.5MM ID? 2) The short lengths between the injectors and the manifold/rail only have hose clamps in the top. When replacing them do you simple press new hose onto the injectors no clamp required on that end or must I add an another clamp to the injector side as the kit would seem to sugest?
__________________
1972 280SE 4.5 |
#2
|
||||
|
||||
When I did my lines, I used bulk EFI-rated hose (I believe 8mm? I may be incorrect, it may be 7.5mm). I had spare clamps that matched the top ones, so I clamped the bottom. This is needed unless you have the bottom OEM-style crimps and the proper crimping tool, which I did not.
__________________
Current: 2021 Charger Scat Pack Widebody "Sinabee" 2018 Durango R/T Previous: 1972 280SE 4.5 2014 Jeep Grand Cherokee Limited "Hefe", 1992 Jeep Cherokee Laredo "Jeepy", 2006 Charger R/T "Hemi" 1999 Chrysler 300M - RIP @ 221k |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|