Dear Friends...I did engine overhauling, and restore , but now my engine's vibrating,,,is not like faulty spark plug or shaking ...,,,it's vibrating ,,,what cause of this problem..?...here's the pict of the process,,,,,all engine parts is new,,,,did I miss something,,?..

another pict,,,

Is it a stick? Whether its a stick or automatic the flywheel may have been balanced to the crank so if you did not mark it when taking it off and reinstall in the same position you may have an out of balance condition.

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

its stick,,,,so,, do i need to take down the engine again..?.,,if so,,,I need to find another mechanic to do this,,,because the recent say its not flywheel problem,,,and they refuse to do that,,,,

You might check the vibration damper on the front of the engine--was it installed correctly? There's also a small shock absorber in the same vicinity that dampens engine vibrations--best of luck



Tim Kraakevik
kraakevik@voyager.net

I believe that part installed correctly....you can see the vibration affect by open up the trunk and engine hood,,,,it really shaky,,,,and i can feel on my leg if mine touch the pedals,,,