Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Vintage Mercedes Forum

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-07-2018, 04:44 PM
Registered User
 
Join Date: Jun 2015
Location: Khon Kaen, Thailand
Posts: 6
W123 from Thailand to Alaska

BLUF: I'm looking for an engine block heater for a 1979 280E (European Spec, although I think it would be the same as the US Spec).

Back Story:
My family and I were living in Khon Kaen, Thailand for the past 3 years. When we first got there, I bought this car. It was originally made in Germany and brought to Thailand in 1981 by a German diplomat. It then bounced around between British and American diplomats, but remained in Thailand. My toddler girl and I did a lot of the work to the car ourselves. Then, right before leaving Thailand, we had it stripped to metal and repainted (in the same original color). The car is in really great shape now and I couldn't bare to part with it because of how attached my little girl became to the car.

So, I paid probably about the entire value of the car in shipping expenses and shipped it from Thailand to Alaska. Now that I'm in Alaska, I don't plan on driving the car in the winter much. But I would like it to be an option. When winter rolls around, I'll put studded tires on it. But I also need a trickle charger on the battery, an oil pan heater, and an engine block heater.

I can't seem to find an engine block heater that I know will fit this engine. Can someone point me to one? I can't be the first person to want to use this car in a cold environment.

Reply With Quote
  #2  
Old 05-07-2018, 04:59 PM
Registered User
 
Join Date: Jun 2010
Location: Miami Beach, Florida
Posts: 508
Will this work?

https://www.ebay.com/itm/Mercedes-Benz-W123-OM617-Block-Heater-OEM-9002034895/302725207106?epid=1823548060&hash=item467bd41442:g:VbMAAOSwXf1aZkI7&vxp=mtr
__________________

1976 280C
SLOWER DRIVERS KEEP TO THE RIGHT.
DRIVE RIGHT PASS LEFT
Reply With Quote
  #3  
Old 05-07-2018, 05:38 PM
Registered User
 
Join Date: Jun 2015
Location: Khon Kaen, Thailand
Posts: 6
I don't think it will as that's for the Turbo Diesel and mine is the gasoline (M110 engine). But I don't know why I didn't think of eBay. I'll start digging around eBay and see if I can find the right one. Thanks for helping me past a mental block!
Reply With Quote
  #4  
Old 05-07-2018, 06:09 PM
Registered User
 
Join Date: Feb 2011
Location: Modesto CA
Posts: 4,075
Quote:
Originally Posted by DefenseEngineer View Post
I don't think it will as that's for the Turbo Diesel and mine is the gasoline (M110 engine). But I don't know why I didn't think of eBay. I'll start digging around eBay and see if I can find the right one. Thanks for helping me past a mental block!
Might not the Engineer inquire of the seller as to the point on the engine at which the heater was installed? And, as to the thread diameter and pitch?
Many details on MB engines of the era are common across the line.
Reply With Quote
  #5  
Old 05-07-2018, 08:23 PM
Registered User
 
Join Date: Jan 2006
Location: Tucson, AZ
Posts: 5,358
Unfortunately the M110 block is lacking in threaded ports. There are several clean-out plates on the RH side which can be used with just a bit of engineering.

W123 from Thailand to Alaska-plate1.jpg

W123 from Thailand to Alaska-plate2.jpg

W123 from Thailand to Alaska-plate3.jpg

W123 from Thailand to Alaska-plate4.jpg

The cavity on the plate I have removed is apx. 1.5" deep. Shouldn't be too much trouble for an engineer to create a replacement plate using a bung as a receiver for the heating element. Hundreds of different elements available in many different configurations.
__________________
“Whatever story you're telling, it will be more interesting if, at the end you add, "and then everything burst into flames.”
― Brian P. Cleary, You Oughta Know By Now
Reply With Quote
  #6  
Old 05-08-2018, 12:40 AM
Registered User
 
Join Date: Dec 2010
Posts: 3,238
You could also use synthetic oil in your engine which will help in winter starting.
Reply With Quote
  #7  
Old 05-08-2018, 12:38 PM
Registered User
 
Join Date: Jun 2015
Location: Khon Kaen, Thailand
Posts: 6
Thumbs up

Quote:
Originally Posted by Mike D View Post
Unfortunately the M110 block is lacking in threaded ports. There are several clean-out plates on the RH side which can be used with just a bit of engineering.

Attachment 147674

Attachment 147675

Attachment 147676

Attachment 147677

The cavity on the plate I have removed is apx. 1.5" deep. Shouldn't be too much trouble for an engineer to create a replacement plate using a bung as a receiver for the heating element. Hundreds of different elements available in many different configurations.
Great info and pictures! Thank you. And yes, I can fabricate a replacement plate with the heating element mounted into the plate. Great idea!
Reply With Quote
  #8  
Old 05-08-2018, 12:43 PM
Registered User
 
Join Date: Jun 2015
Location: Khon Kaen, Thailand
Posts: 6
Quote:
Originally Posted by Benz Dr. View Post
You could also use synthetic oil in your engine which will help in winter starting.
I'm already using synthetic. Keep in mind, -40 is common. -60F (-51C) is also not unheard of here. So, when I'm talking cold, I'm talking really cold. But if it drops below -40, I don't plan to drive the car. Parts start breaking around -50F. At that point, it's better to stay home and ensure the heat in the house keeps functioning.
Reply With Quote
  #9  
Old 05-08-2018, 01:30 PM
Registered User
 
Join Date: Jan 2006
Location: Tucson, AZ
Posts: 5,358
Before you ask, the plug showing , although it is a coolant passage, is only about a 12mm thread. I doubt you can find a heater element that small.
__________________
“Whatever story you're telling, it will be more interesting if, at the end you add, "and then everything burst into flames.”
― Brian P. Cleary, You Oughta Know By Now
Reply With Quote
  #10  
Old 05-10-2018, 01:48 PM
Tomguy's Avatar
Vintage Moderator
 
Join Date: Aug 2002
Location: near Scranton, PA
Posts: 5,407
I would look into one that replaces the oil drain plug. It will keep the oil warm (more important than warm coolant) and that would likely have a more positive effect on cold starts than a plug in a water passageway.

There are also universal heating pads that attach to the oil pan itself.
__________________
Current:
2021 Charger Scat Pack Widebody "Sinabee"
2018 Durango R/T

Previous:
1972 280SE 4.5
2014 Jeep Grand Cherokee Limited "Hefe", 1992 Jeep Cherokee Laredo "Jeepy", 2006 Charger R/T "Hemi"
1999 Chrysler 300M - RIP @ 221k
Reply With Quote
  #11  
Old 05-15-2018, 12:54 PM
Registered User
 
Join Date: Oct 2012
Posts: 21,821
I once had the same car and found, in a wrecking yard, a 280E with a heater that was spliced into the rear radiator hose.

I just cut out a section of hose, replaced it with the heater tube, and it worked.

By the way.... You tires will freeze solid at minus 40F.

And old and very dangerous trick: Steam cars were taught to start on a summer day. The solution was to put a pan of burning coal under the car at night to keep the temps up.

And folks wondered why so many steam cars used to catch on fire.....
Reply With Quote
  #12  
Old 05-15-2018, 01:13 PM
TX76513's Avatar
Platinum Member
 
Join Date: Apr 2003
Location: Brandon, Mississippi
Posts: 5,209
A company called Simate makes a very nice inline hose coolant heater and recirculator that work very nicely on W123,s Amazon used to sell them - maybe still do.

__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif
15 VW Passat TDI
00 E420
98 E300 DT
97 E420 Donor Car - NEED PARTS? PM ME!
97 S500
97 E300D
86 Holden Jackaroo Turbo D
86 300SDL
(o\|/o)
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page