Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Vintage Mercedes

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-16-2003, 01:38 PM
kpb's Avatar
kpb kpb is offline
just a guy
 
Join Date: Dec 2003
Location: Central/SE Ohio -- Heart of the Rustbelt
Posts: 810
sluggish power window -- '72 280SE

Hello all, yes, it's me again.

Been tinkering with my non-functioning LR window and, by some stroke of fate, taking things apart (to a point), cleaning, and reassembly has caused the window to function -- Eureka! The lingering issue is, the window appears to bind about one-half way up and down, manually pulling it up assists greatly. Is the window supposed to move out slightly when closed? I cannot see any obvious obstructions or bent pieces.

I ran a search here under "window motors" and found a few tips such as shimming the motor to better line up with the regulator. My problem is (still being without my ordered manuals) howinahell to get to the motor in the LR door. I pulled the latch mechanism hoping there would be a bit of access there but to no avail. I saw one suggestion of waxing the window edges/channels also or using WD40, guess it couldn't hurt. I do not want to button the door back up if there is something I can do while I am in here to alleviate the condition.

Your gracious ideas/suggestions appreciated.
Reply With Quote
  #2  
Old 12-16-2003, 02:08 PM
Tomguy's Avatar
Vintage Moderator
 
Join Date: Aug 2002
Location: near Scranton, PA
Posts: 5,086
I don't know of any way to actually GET TO IT w/o taking the door apart itself (with a Sawzall). I was in the junkyard trying to get the LR one out and I had it completely disconnected and still couldn't pull it out - poor green 108 that also donated an ignition box to me and lower A-arm for the pass. side wouldn't let go of it. I only had pliers, no metal cutters, and was trying to pry the door apart, to no avail. I would think you have to take the arm off the mechanism but I didn't want to do that and risk being hurt by (or breaking) the strong spring inside the regulator.

Try lots of grease on the gear and the plastic bits it rides/glides on. That got my windows to open/close 200% faster (and I also "worked" them up and down quite a bit to help as well).
__________________
Current:
2018 Chrysler Pacifica Limited
1999 Chrysler 300M - 211,xxx

My Mercedes Benz 108 and 109 resource site

Previous:
1972 280SE 4.5
2014 Jeep Grand Cherokee Limited "Hefe", 1992 Jeep Cherokee Laredo "Jeepy", 2006 Charger R/T "Hemi"
Reply With Quote
  #3  
Old 12-16-2003, 02:30 PM
Registered User
 
Join Date: Oct 2003
Location: albuquerque,nm.USA
Posts: 87
try some graphite on the runners for the windows,also check the old rubber in the tracks for the window.i had the same problem and this worked for me.you can also check the rubber piece on the window motor sometimes it slips,and can slao be rotten.
Reply With Quote
  #4  
Old 12-16-2003, 03:15 PM
PaulC
Guest
 
Posts: n/a
First clean out any old lubricant that may be currently residing within the tracks. 30 year-old lube makes peanut butter look runny and, in combination with cooler weather, could be slowing things down.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page