|
|
|
#1
|
|||
|
|||
how to?
i have a 1979 280sel the steering coupling is worn rubber bushings are gone after25 years is it easy to replace?and how do you do it?i did a search but could not find out how to go about it any help would be great thanks
|
#2
|
|||
|
|||
If it's like my SL -
Get wheels as straight as possible IN CAR - Mark wheel-shaft position Remove steering wheel Remove turn signal switch Remove screws holding steering shaft to housing IN ENGINE COMPARTMENT Mark shafts on both sides of coupling Undo screws holding coupling together (easier said than done) BACK IN CAR Pull steering shaft up enough to allow coupling to be removed Reassemble in reverse order
__________________
Chuck Taylor Falls Church VA '66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe |
#3
|
|||
|
|||
how to?
thank you for your reply c taylor738 you have given me more confidence in doing it i will take my time and try to enjoy it. once again thanks
|
Bookmarks |
|
|