. . . to put them on without removing the wheels?

I've bought a set of the 2002-style center caps (silver, with chrome ring and star) from Perf. Products. I did it also for my 420SEL, but I waited until it was time to rotate the tires, then had the shop put them on. Should I do that now, or is there some clever trick to getting the old caps off and the new ones on without dismounting each wheel?

Thanks,

__________________
* *
-- Paul W. (The Benzadmiral)
('03 Buick Park Avenue, charcoal/cream)
Formerly:
'97 C230, smoke silver/parchment; '86 420SEL, anthracite/light grey; '84 280CE (W123), dark blue/palomino

I've tried to take it off using an eyeglasses screw driver (the smallest one). I was able to pop one out, but I nicked my wheel a bit. So I did not continue with the other 3.

I would wait until you rotate and balace the tires again.
If you can't wait, go to Costco. It's only $16 (rotate and balance) all 4 tires.

If you don't need/want the old caps then just shove a screwdriver thru the plastic and pop them off the car while the rim is still mounted; then pop in your new ones. That what I did. Caps are only like 4-5$ each new...even less for the old style ones.

__________________
Jim

1992 500E
2007 CLK63
2003 Audi RS6
2001 Audi allroad