Sears did alignment, but the car pulled to the right.

I had them check again, but they said the alignment was within spec, and that there should be no problem.

I came back again and they gave me 100% refund.

Below is the spec at my second visit (though they did not re-adjustment, it was quite different from the first print out).

* means degree

Left/Right

Front camber: -0.7*/-0.6*
Front caster: 9.2*/9.1* (at first visit this was omitted)
Front Toe: 0.21*/0.10* (at first visit the numbers were different: left and right values were closer to each other)
Front SAI: 14.3*/14.5*
Included Angle: 13.6*/13.9*

Rear camber: -1.3*/-2.5*
Rear Toe: 0.06*/0.10* (at first visit it was -0.02*/0.09* if I remember correctly)


The Sears print out format is the same as an MB dealer's print out. So I guess that they have the same Hunter alignment machine.

__________________
1992 300D 2.5 turbo diesel. 319 k miles.
124.128 chassis, 602.962 engine, 722.418 tranny.

You've got some wicked camber on one of the rear wheels (- 2.5 deg. ).

__________________
2007 C 230 Sport.

Heh. Betcha they don't do any MBs ever again.

__________________
1985 CA 300D Turbo , 213K mi