|
|
|
#1
|
||||
|
||||
will this wheel fit a w123
16", dont know what it is from I can get them cheap.
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) Last edited by lutzTD; 11-23-2011 at 08:37 PM. |
#2
|
||||
|
||||
need to know the ET front and rear .. then determine from there what thickness spacer as well as length lug bolts will be needed
coming to the GTG? |
#3
|
||||
|
||||
Quote:
I will message them, they seem pretty non-mechanical so I doubt I will get the pertinent info i will try to be there if I can get my front end back together. I spent 1.5 hrs on a single tie rod end. man was that baby stuck.......
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) |
#4
|
||||
|
||||
the guy thinks they are et-36
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) |
#5
|
||||
|
||||
they look to require a fairly thick spacer for a 123.
Tom W
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#6
|
||||
|
||||
its alot cheaper and easier buying new tie rod assemblies...
|
#7
|
||||
|
||||
I bought the whole front kit, the trouble m having is getting the old one off. I had to remove the idler arm and hammer the tie rod end out in a vice. this was after beating on a pickle fork manually for 30 mins, then hitting it with an air chisel pickle fork for another 15. I needed to replace the idler bushing assembly anyway, but it shouldnt be sooooo difficult
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) |
#8
|
||||
|
||||
looks like they are et-36 and I need et-23 with 16's.... but I am getting these wheels with almost new tires for $200, I can get 12mm spacers for $85 a pair and I think I only need the front. seems reasonable for the much nicer look. hopefully it will work in the rear with no spacer but I have been wrong before........
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) |
#9
|
||||
|
||||
the wheels are ET-37. according to my research thats about dead center where I need to be. tires are 205's and clear fine. the rim just barely clears the tie rod end. i had to move the weights from the inside lip to the outside. I will get stick ons later. I really like the look. now I think it needs to be lowered about 1.5 inch in the front and an inch in the back. anyone have experience with cutting coils down? is there a shorter stock spring offered somewhere on another model?
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) Last edited by lutzTD; 11-23-2011 at 08:37 PM. |
#10
|
||||
|
||||
Quote:
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
#11
|
||||
|
||||
Quote:
i have about a 1/4 inch clearance to the tie rod, I am going to try it. I took it out and took some corners and it all seems to work ok. I am pretty low cash conscious on this car, is cutting out a few coils out of the question? maybe gasser springs might be cheaper than diesel coupe springs
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) |
#12
|
||||
|
||||
I've got a pair of 5mm spacers that I might be convinced to cough up...I'm probably going to remount my 18's for the GTG, but will likely put on the 4 8.5's and leave the 9.5's at home. That way I won't need to run spacers...but I bet the 280CE will look HOT with 9.5's in the rear...
My next 300CD will be lowered, and may not be able to clear the 18's so they're on their way out I'm afraid.
__________________
-James '85 280GE...sold '96 Impala SS ~ 6-speed 396 '14 Cadillac Vagon. . . . . . . . . . "Life without knowledge is death in disguise." - Hans-Peter Geerdes |
Bookmarks |
|
|