|
|
|
#1
|
||||
|
||||
wheel offset question
posting here for a fast reply
what is the offset on a set of staggered Funnel spokes (7.5 F, 8.5 R) from a 2005 C230 sport??? must know sooooon.. Last edited by TheDon; 03-28-2010 at 03:23 PM. |
#2
|
||||
|
||||
Don is it stamped on the wheel? I have one setting here could go look for you.
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#3
|
||||
|
||||
the guy that is auctioning them doesn't have them listed.. I want to know before he tells me so I can withdraw my bid if they will not fit my W123
is it a 7.5 or 8.5 because depending on which one of the wheels that was curbed I might need an extra the fronts have 225's and the rears 245's |
#4
|
||||
|
||||
8.5's pretty serious offset. Trusty wooden ruler says 4.5" of wheel are behind caliper
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#5
|
||||
|
||||
those aren't funnel spokes
this is what I'm talking about http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=006&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=160199814815&rd=1 |
#6
|
||||
|
||||
Quote:
those are my favorite wheels too. I have heard they fit fine. since they are 17" they will clear the tie rod so from my research i think you would be ok from ET25 to ET35. My 16" are ET35 and any more than that they would hit the fender with 205/55/r16. BUUUT, when I was looking I planned to buy them no matter what and buy spacers if I had to.
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) |
#7
|
||||
|
||||
understand - just figured the offset for 230 wheels would be the same.
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#8
|
||||
|
||||
thanks TX
I see funnel spokes all the time in the parking lot at work.. I keep thinking.. all I need is two from the front and two from the rear.. one at a time and I'll have a set. hehehehehehhe |
#9
|
||||
|
||||
I have a set of 16" from a W140. For S and Giggles put one on the front of a 126 when I was doing brakes - Looked good but no way it would work (unless I was just going straight).
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
Bookmarks |
|
|