Can someone please tell me the part numbers for the 7.5x17 Evo type wheel in polished and anthracite finishes ?. What wheel bolts will i need to fit these wheels to a 201?.
Are all genuine Benz alloy wheel lug bolts the same ?, again if anyone can tell me the right part number or length i would be most gratefull. As anyone fitted the 8.5x17 wheels on the rear of a 201?. thanks Linds Cornwall UK

(6-spoke) polished EVO II rim in 7,5Jx17 ET37 has part# B6 6 47 0518 and the bolts to use: B6 6 47 0111 (set of 5 bolts) and the locking lug: B6 6 40 8233.

(6-spoke) polished EVO II rim in 8,25Jx17 ET34 has part# B6 6 47 0084 and all lugs are same # as above.

(6-spoke) EVO II rim in 8,25Jx17 ET34 has part# B6 6 47 0061...dunno what the difference is with the rim posted above...probably the color...all lugs are the same as above.

greetingz,

__________________
1990 300SL-24
1993 C250D with a minor 600+k kilometer
www.MBenzNL.com(the Netherlands)

Many thanks once again MBenz you are" the master of the Benz" it is impossible to buy the parts from UK Mercedes dealers they refuse to even look for anything without a VIN number and obviously a normal 201 VIN is not much use.
Do you think that i could squeeze the 8.25 rims under a 201 with Eibach springs?, what tyre size would fit?.
Thankyou once again and goodluck with all your many projects, when will the CE see some love and modification?.
Cheers Linds Cornwall UK

Linds,

I had 7,5Jx16 rims on my 190D with 215 tires and that was about as wide as I dared to go (considering the fact that it was 6cm Eibach lowered and scraped the road with the steel carter protection plate occasionally.
Personally I wouldn't mount 8,25J rims under a W201...but I bet that there are people out here who already did that.
As far as I know the UK and Cornwall / Devon (I have been in Lands End, Dawlish and Lynton & Lymouth a couple of years (10?) ago, not all the roads are as good as they should be...

Master of the Benz ??? I think you've got it all wrong now. I am Slave of the Benz!!!!

The 300Ce already got smoked taillights, clear corners and W124 E class headlight lenses. I had a new W124 E class hood and headlight trims painted, but the color was not good enough... When all other cars are finished (SL, more mods for the C class, some mods on my mothers SLK), I will pick up some CE work again (the car is not used at all and has to wait till there is time for it).

greetingz,

__________________
1990 300SL-24
1993 C250D with a minor 600+k kilometer
www.MBenzNL.com(the Netherlands)

Blair has 17x8.5s on his lowered 190E. He had to trim off a little bit of the fender lip. Check the pics out at: http://members.optushome.com.au/blairc/

Personally, I have 16x7.5 ET 12 rims that just barely fit under the rear fenders. It only rubbed when I had 4 people in the car and went over a large bump. But now with the EVO II kit being installed, I won't have to worry about rubbing anymore

Later,

Daniel

__________________
87 190E EVO II Turbo

MBenzNL,

Thank you very much for the part numbers. I think I will be ordering the polished 17x7.5 Evo wheels for my E420 W124. Especially after I saw a silver E500 with brand new polished Evo wheels... I was sold.

My question is: Are those the lug bolts that I am supposed to use for my 124 car? (B6 6 47 0111)

__________________
2008 BMW 335i Coupe