|
|
|
#1
|
|||
|
|||
Anyone with a w123 using these rims??
did you use an spacer?? how many mm??
|
#2
|
||||
|
||||
please post size and offset. it is written on the inside of the rim. I had a set similar that were 16" with 23 offset and they are so close to the tie rod ends I had to remove the weights on the inside and install stick ons. back was fine
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) |
#3
|
|||
|
|||
15x6.5 ET44
|
#4
|
||||
|
||||
I think you need to be around ET23, sounds like some pretty big spacers needed, and also very long lug bolts unless the spacers are the bolt included type, but Ive never seen those for a benz
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) |
#5
|
|||
|
|||
where can I get those extra long bolts?? i was lucky to find one of the normal ones at autozone.
|
#6
|
||||
|
||||
Quote:
I had a lot of trouble finding bolts for mine with 12mm spacers. I got them on ebay
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) |
#7
|
||||
|
||||
Similar to W124 15-hole flat face wheels. If anything, I would try to find a similar design with a lower offset value to minimize excessive suspension wear (suspension geometry is altered).
__________________
http://farm8.staticflickr.com/7271/7...144c3fc1dc.jpg |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|