These look decent and are cheap. Looks like 1990s S class. Guy selling doesn't know. mercedes factory rims

Depends on the offset.

If my memory serves me right, 8-hole design rims of set is 34 -- may require 1/2 spacers to fit a 116 (which has the same offset for a 107, 108/109, 114/115 and 126)

__________________
There is nothing more expensive than a cheap Mercedes

Thanks. If I gotta use a spacer I'll probably do it. I've been doing some research, but havent turned up alot of results. If the rubber on em is good I'd say ill risk the 200ish bucks to see if they turn out ok on this car.

Its depend on the circumference...

__________________
sensabrake

Ok I got the spacer thing all figured out after I measured. If im running a 15mm spacer will I need an extended lug bolt? If so what size and where to get em? Thanks again

Ok so I ran into a bit of a problem. The spacers I got wont fit over the hub on the front. Does anyone know where to get a set of non generic spacers that will clear the hub? Thanks

ebay has alot of spacers some as low as $70. a pair.From what I'm reading is you don't want to run spacers on the fronts

__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran