|
|
|
#1
|
||||
|
||||
Lug bolt Shank length? Clk rims on W124
Hey Hows it going, I just had new winter tires installed on some wheels I had off of a CLK which I have used on my car before but somehow misplaced the lug bolts and now need replacements
My car takes a 12mm X 1.5 bolt but not sure on the length of the shank I should get. I called the dealership and explained the wheels and was told to go with a 40mm length bolt, so that's what I ordered and when they arrived I could tell they are way to long. the wheel is pretty thin a the point it connects to the car. I think I need something similar to what an old W123 would have used for the steel rims. Anybody done this swap before? any ideas on length? Stuck Here is the car I'm fitting them on,
__________________
Live simply so others can simply live 07 E350 sport Wife's Daily 01 E320 sport My Daily 00 C230 Kompressor Our back up (new Arrival) 87 300D Turbo my Daily for 8 yrs. Selling to neighbor 82 GMC Jimmy (K5) 6.2 Diesel (my Wheeler) 73 Roadrunner 340ci My very first car, still own it Last edited by davidlee; 11-24-2014 at 03:20 AM. |
#2
|
|||
|
|||
I have these wheels on my 124 and they use the shortest M/B lug you can get. I dont have any handy as I type but the shank probably isn't over 15mm.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#3
|
|||
|
|||
Measure the thread projection (distance beyond the back of the wheel) on a lug bolt for one of your loose everyday wheels. You need the same thread projection for your CLK wheels with the winter tires (so you achieve the same clamping force after torquing the lug bolts). Measure the thread projection on a loose CLK wheel ... presumably it will be greater than on your everyday wheels. Subtract the thread projection difference from your existing lug bolt length to determine the length of the lug bolts you need for the CLK wheels. If the shank of your existing lug bolts projects past the back of a CLK wheel then you will need a lug bolt with a shorter shank, as well as a shorter overall length.
__________________
Fred Hoelzle |
#4
|
||||
|
||||
^ This.
Then order bolts from Otis LA, 'cause they're awesome and cheap. |
#5
|
||||
|
||||
Quote:
wheel question for my 300D
__________________
http://farm8.staticflickr.com/7271/7...144c3fc1dc.jpg |
#6
|
||||
|
||||
Steel wheel lug bolts from a W114/W115/W123/W126/R107 will work just fine. These are shorter than the alloy lug bolts.
Jim
__________________
14 E250 BlueTEC black. 45k miles 95 E320 Cabriolet Emerald green 66k miles 94 E320 Cabriolet Emerald green 152k miles 85 300TD 4 spd man, euro bumpers and lights, 15" Pentas dark blue 274k miles |
#7
|
|||
|
|||
I'm using the lugs from a W123 with the steel wheels on my 300TE with the CLK wheels and the fit is perfect.
|
Bookmarks |
|
|