Anyone w/ 18x8 on 16Valve?

I found a wheel that I definitely want to use on my 16 valve...but it is 18" x 8"...I know that people have used 18" x 7.5" wheels, 215/35R18 tires, and H&R springs with no problems...my questions are:
1)How much modification is necessary if I use 225/35R18 on 18"x8" wheels with H&R springs?
2)Will I have less problems using 215/35R18 in the front and 225/35R18 in the rear?
3)Is it safe to use a 215 width tire on 8" wheels or is 225+ necessary?
Please do not respond with a simple "not recommended" comment.
Thanks in advance,
Peter

[Chiragp]

Well here it goes. First, as far as tires go, you should be able to get 225/35/18 with no problems if you can get the 215/35/18 on them anyhow. My logic, If you are able to replace 215/40/17 with 225/40/17 and still have the lowest pad and H&R, you should be fine (I know a couple people with that setup now, and that was on a 17x8" replica rim too.) Off course the fenders must be rolled.

The reason I would not go with 215/35/18 is because it does not have the load carrying capacity, however the 225/35/18 from Toyo do because they are reinforced. I know Yokohamas all so make that size too. They will also help protect your tires.

Since the car I mentioned above had 17x8, I don't see why the 18x8 she be a problem.

That is my rational. While I can't give a guarantee, I would definitely get the fenders rolled, and try the 18x8. You should be able to get by with 225/35/18, if not then most definite with the 215/35/18.

Good Luck.

------------------
Chirag (Charlie) Patel

- 99 Mercedes-Benx ML 430 V8 w/custom TV, Video, UHF, speaker system
- 93 190E 2.6 (4-sale) w/ an amp, equalizer, and CD-changer, integrated w. stock stereo for integrated cellular phone speaker system
- had a 93 190E m103 3.2, 5-speed trans,
- had a 88 300E 2.6
- had a 84 300TD w/275k+ miles
- 2001 C-Class - Maybe (if 190E sells)