|
|
|
|
|
#1
03-25-2018, 12:26 AM
|
|||
|
|||
|
w210 AMG monoblock 18" wheels
In the market for a set of 18" AMG monoblocks for w210. Specifically, for my 1998 E300. I see 18" AMG monoblock wheels with 129 part numbers, 124 part numbers, and 210 part numbers. Are they all interchangeable? I.e. are the dimensions and offset identical between them all?
They all "look" the same, but I wonder if there is some slight fitment difference between them that would prompt MB to issue the different part numbers? These wheels are not inexpensive, so the last thing I want is to buy a set, and find out they don't fit my w210 properly, or they have a funny offset, or something like that. Thanks in advance for any info or advice!
__________________
1998 E300 turbodiesel America's Rights and Freedoms Are Not The Enemy! 
|
|
#2
03-25-2018, 06:54 PM
|
|||
|
|||
|
Offsets will be all over the map. I have a staggered set of 18's that are 8 1/2" with ET44, and 9 1/2" ET 46. Part number starts with 220. The stock 16" on my 500E are 34, I think, but 8" wide.
__________________
John Breslin 93 500E, 92 500E, 86 190E 16V, 62 220SEb Music City Chapter MBCA
|
|
#3
03-25-2018, 09:59 PM
|
||||
|
||||
|
I have a set from a W210.
__________________
David Hendy '97 Renntech E60RS '97 GMC 2500 Sub' Diesel '95 E300D '88 300TE '88 250TD '84 L/Rover 109
|
|
#4
03-26-2018, 09:54 AM
|
|||
|
|||
|
The thick spoke wheels could also be found on a 97 SL with the " Sport " package. I'll have to dig around for numbers. The 97 SL sport wheels do not show up for 97 and 98 + SL Sport got thinner spoke wheels.
Also have a look on car-part.com , try 98 + E55.
|
|
#5
03-26-2018, 10:16 AM
|
||||
|
||||
|
Part numbers from my set which came from an '02 E55:
Front HWA1294010102 18 X 8 ET31 Rear HWA2104010202 18 X 9 ET35
__________________
David Hendy '97 Renntech E60RS '97 GMC 2500 Sub' Diesel '95 E300D '88 300TE '88 250TD '84 L/Rover 109
|
|
#6
03-26-2018, 10:24 AM
|
|||
|
|||
|
torsionbar, check either the back of the wheels on your 1998 E300 for the ET (offset in mm), or your Owner's Manual for the ET of the stock wheels for your vehicle. Any replacement wheels that you consider should have the identical, or nearly identical, offset to avoid interference issues with the brake calipers or suspension components. Of course, if you switch to significantly wider wheels you could have interference problems with the fender wells and/or suspension components.
__________________
Fred Hoelzle
|
|
#7
03-26-2018, 10:55 AM
|
||||
|
||||
|
I can bolt my wheels to my '99 E300
But if I do, they may not ever come off... My set are guaranteed to fit.
__________________
David Hendy '97 Renntech E60RS '97 GMC 2500 Sub' Diesel '95 E300D '88 300TE '88 250TD '84 L/Rover 109
|
|
#8
04-01-2018, 10:32 AM
|
||||
|
||||
|
Here is a pic of my 18" E55 monoblocks on my '99 E300
__________________
David Hendy '97 Renntech E60RS '97 GMC 2500 Sub' Diesel '95 E300D '88 300TE '88 250TD '84 L/Rover 109
|
 |
| Bookmarks |
|
|
Linear Mode
