Quote:
Originally Posted by jmak124
I also have the Watts 1/4 ID Clear Vinyl tubing from Lowes for less than $2. On the label it clearly states "Use for: Low Pressure", Since JimmyL uses it, I'm assuming its fine.
|
You assume correctly, as you are only going to be using
very low pressure anyway.....
Quote:
Originally Posted by jmak124
I don't have any automotive grade silicone, but I do have some for aquarium use... will it work?
|
Silicone is available almost every place there is, even the automotive grocery store isle. Very cheap too......
I will have to use mine when project 300D/240D progresses further. Hopefully it won't shoot brake fluid out of rubber tabs on top of fluid reservoir. You will want to make sure those are not cracked or split. Even with only 5psi......