Quote:
Originally Posted by Arthur Dalton
>
I knew that, so I re-worded it.
Anyway, that eliminates the BM and points to the Regulator.
But , before changing that, make sure you have the Var V at that third wire, as that is what triggers the Reg.
I mention that wire as yellow, but it may be a different color b/c I do not have the schematic for your model. The 124 uses yellow.
That 3 wire feed plug should have a ground, [ neg] a 12V Hot [pos+] and the third will be the Var V from the Control Panel.
If you have 12 V from the plug pos and ground and Var V on the other wire
and ground..then you need a regulator.
|
New test confermed i need a regulator.Thanks Arthur and every one for all of your help.