Quote:
Originally Posted by 280EZRider
It usually helps to see all this stuff mounted in the car, so since I had the SR panel out today to replace the front seal, I took a pic: The panel is out. Right side: The upper black strip is the felt and just below it is the rail with the stop attached at the rear (2 rivets & 1 screw in the middle). The black thing with the adjusting screw in the middle below & forward of the stop is the support/adjuster (ramp) for the rear of the panel.
Happy converting!
|
Above and Beyond!
thanks a lot man, very cool!
looks like i'm missing those pieces, guess i'll need to post in the parts section...