Quote:
Originally Posted by daw_two
Joe --- resetting the memory will NOT help you get the seat up.
If a previously stored position had the seat position UP, then pressing the button would bypass the seat reclining switch on the door and the seat would move to the "stored position".
You should be able to remove the seat "buttons" and be able to get (spray) some contact cleaner into the switch without removing the door panel.
Good Luck.
|
Right, I understand. I meant that once I get the seat up I will set the correct position into memory.
Thanks for the help!
__________________
"I have no convictions ... I blow with the wind, and the prevailing wind happens to be from Vichy"
Current
Monika '74 450 SL
BrownHilda '79 280SL
FoxyCleopatra '99 Chevy Suburban
Scarlett 2014 Jeep Cherokee
Krystal 2004 Volvo S60
Gone
'74 Jeep CJ5
'97 Jeep ZJ Laredo
Rudolf ‘86 300SDL
Bruno '81 300SD
Fritzi '84 BMW
'92 Subaru
'96 Impala SS
'71 Buick GS conv
'67 GTO conv
'63 Corvair conv
'57 Nomad
|