Quote:
Originally Posted by Robert Squires
* The selection of wrenches, crow's feet, etc is a hassle but what about the tubular frame runner that runs right across the front, 1/2" away, of the expansion valve? On at least the later W126's ('91 350SDL in this case), the factory added a tubular bird-cage in the center of the dash as a stiffener. It extends to the left over to the steering column, and virtually blocks access to the upper 2 exp valve fittings.
* Removing that tubular frame would amount to removing the dash. There ought to be another way.
|
I used a 22 crow foot and modified a 17 & 19 if anyone needs to borrow them I'd be willing to do so as long as I get them back. It took about 30 minutes once I tweaked the wrenches.