Greetings,
The entire wiring diagrams for w124 may be found here -
http://www.w124performance.com/service/w124CD1/Program/ETM/ETM.pdf
It's a big file (77 MB).
I've isolated the headlight wiring diagrams. There are two, 1986 to 1990 which is here -
http://thetwodocs.com/lights%2886-90%29.gif
and 1991+ which is here -
http://thetwodocs.com/lights%2886-90%29.gif
I did not upload them to PeachParts as their size limit results in an image that is hard to see.
Also the older schematic is very difficult to read so I have created a larger version that is more legible. It is here -
http://thetwodocs.com/lights%2886-90%29_detail.gif
I wish to entirely remove the low/high beam headlights from this circuit. Apparently I can remove 4 diodes as per this link -
http://www.peachparts.com/shopforum/showpost.php?p=2504982&postcount=12
Or entirely bypass the relay as per this post -
http://www.peachparts.com/shopforum/showpost.php?p=2587059&postcount=3
---
I'd like a little advice as to which leads I should remove from the relay and tie together.
Thanks.