Quote:
Originally Posted by vexed
From what you posted pin 9 would give roll bar codes. Have you tried disconnecting the roll bar controller. To do this disconnect the battery and then the controller which is underneath the rear seat. It's the hack way of ctrl-alt-delete wait an hour and then reconnect in the reverse order, eg battery last. The thought is that clears any faults stored in the controller.
|
Tried that with no luck, I can't seem to hear the pump run when I press the button to lower/raise the rollbars. Also when I start the car, the rollbar light doesn't flash at first, it just comes on steady. (Just got car back from bodyshop)