Thread: Pilot Bearing A Tight Fit, Possibly A 85 crank?
View Single Post
  #17  
Old 10-20-2013, 03:20 PM
Dan Stokes Dan Stokes is offline
Registered User
  
Join Date: Sep 2012
Location: Wilmington, NC by the Atlantic ocean
Posts: 2,530
Quote:
Originally Posted by charmalu View Post
The bearing I stuffed in the Crank is Part# 115-980-01-15. a SKF bearing. the other # is 6202-2RSJ. 15 x 35 x 11 MM. It`s nothing MB specific, just a run of the mill bearing used in a lot of applications.

I have been searching on Google and looking in various Bearing supply places, there seems to be no bearing the size, 15 x 34 x 11mm.

Though a few minutes ago I did find this site that shows a 15 x 34 x 11 bearing for $1.50.

15x34 Bearing 15x34x11 Metal Bearing 6202ZZ

I rented the Pilot Bearing puller like Dan shows in an above post from Auto-Zone. Dan I don`t know how you got it in the hole of the bearing, but it is too large to fit in there. Even tried my spare FAG bearing in my hand, and a no go.


Charlie
I had to SLIGHTLY grind the tips of the part that goes thru the hole, then angle the arms (remove the O-ring) so that the arms enter one at a time. It's a close fit. I'll send you mine if you pay postage both ways. Not something I use a lot!

Dan
Reply With Quote