View Single Post
  #6  
Old 08-19-2014, 10:15 AM
Simpler=Better's Avatar
Simpler=Better Simpler=Better is offline
Ham Shanker
 
Join Date: May 2008
Location: Baltimore, MD
Posts: 2,544
Alright kids, so you can make these fit a 616 by using two end pieces It will take some grinding though, and probably some kind of support welded on the end.

I'll sell the right combo for a 616, but you've got to understand that it's not a perfect fit and will take some grinding & welding on the bolt holes to make it line up right. Same price for the lego'd 616 assembly as a 617 assembly. Next batch I'll probably get 616-specific flanges made up.

If you want to use these on a 616 I'll be sending you 1.25" flanges as they can be ground to match the gasket. The 1.5" flanges match the 617 so I'll push them that direction.



Attached Thumbnails
FS-617 Blank Exhaust Flanges-fit1.jpg   FS-617 Blank Exhaust Flanges-23fit.jpg   FS-617 Blank Exhaust Flanges-4fit.jpg  
Reply With Quote