Quote:
Originally Posted by JRImrie
The bolt is M10 1.5 45mm long. I could not fit any 8mm hex wrench in there myself they would not fit needed about 1/2" cut off to fit.
|
I have a made in china allen wrench set, titan branded I think, the 8mm key fits the bolt and clears the radiator fins too (best use a pizza box to save those fins)
I use the key to just crack it loose - my pulley holder is a water pump pliers which I use to hold the water pump pulley with belt on it.
After its loose I use the shorty socket to remove the bolt. You can buy this bolt from ace hardware if you want. You might need to polish off the sides of the new bolt head if its not a MB purchase.