View Single Post
  #14  
Old 06-12-2016, 11:48 AM
jay_bob's Avatar
jay_bob jay_bob is offline
Control Freak
 
Join Date: Oct 2011
Location: Columbia, SC
Posts: 3,941
Oil quantities per WIS assuming a complete rebuilding:

120 ml in the compressor
20 ml in the condenser
40 ml in the evaporator
10 ml in the dryer
20 ml in suction line
20 ml in pressure line
That is 230 ml or 7.75 fluid ounces.

When you oiled it did you drain the compressor first? There is a drain bolt in the front half of the compressor right by the electrical plug. I almost made that mistake and would have had double the amount of oil in it.

My story: http://www.peachparts.com/shopforum/diesel-discussion/377507-w210-compressor-seized.html
__________________
The OM 642/722.9 powered family
Still going strong
2014 ML350 Bluetec (wife's DD)
2013 E350 Bluetec (my DD)

both my kids cars went to junkyard in 2023
2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles)
2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles)

1998 E300DT sold to TimFreeh
1987 300TD sold to vstech
Reply With Quote