Quote:
Originally Posted by 300d 4 ME
That is lookin good!
When it gets time to paint, or coat it in something. I can't recommend enough something like "Rust Bullet"- Amazon, or Miracle Paint(Ebay, or Bill Hirsch). It drys because of moisture, so even on a wet day. Hardens like shiny smooth concrete. Yet somehow not brittle.. Way better than cheap black paint.. Both work amazingly well. The combo of one of these epoxy paints, a welder, and some fiber glass means you can do almost anything..
Needless to say use a respirator.
|
I'm going to start sounding like an advertisement for Eastwood, but here's what I'm using.
Eastwood Brushable Seam Sealer (on all welded seams)
https://www.eastwood.com/ew-brush-on-seam-sealer-quart.html
Rust Encapsulator Plus
https://www.eastwood.com/eastwood-rust-encapsulator-plus.html
And for the box sections of the body, Internal Frame Coating.
https://www.eastwood.com/eastwood-internal-frame-coating-14oz-aerosol.html
Depending on how the Rust Encapsulator looks, I might paint over it with something else.
I'm using Kilmat 80 mil sound deadening material on the floor and over the transmission tunnel. If I have enough I'll add it to the doors.
https://kilmat.com/