View Single Post
  #1  
Old 07-18-2020, 12:30 PM
bhammontree bhammontree is offline
Registered User
 
Join Date: Jul 2020
Posts: 39
Clutch Pedal not Returning

Hello

I have a 1967 200 Diesel with a clutch problem. I inherited this car and it has been un-driven in a barn for 10-15 years. I was told it needed a clutch so I replaced clutch, pressure plate, throw-out bearing, pilot bearing, slave cylinder, master cylinder, and hose between master/slave. The clutch works great now, but the clutch pedal sticks in the down position. I have bled it several times using a pressure bleeder from the slave cylinder, and I get fluid to pass through the system and overflow the reservoir. As a temp fix I have installed a return spring on the pedal to pull it back up, and that works but I would like to get it working normally. Any ideas of what to try would be greatly appreciated.
Reply With Quote