Quote:
Originally Posted by KCM
Benz Dr., are you saying that the pedal should travel 20mm before engaging the master cylinder piston? I set the push rod so there is just a tad bit of free play and so the master cylinder piston retracts completely to allow the clutch and hydraulic pressure to push the pedal back and over center. Has worked for me (as long as there is no air in the system).
|
More like that distance before you feel any real resistance to movement. Some of that movement would include the free play at the pedal. Both the push pin on the MC and the slave cylinders need free play to perform properly. You won't need much but you will need some. Your system may adjust fifferently and 20mm is only a rough measurement.