Remove the black trim by the door striker by removing the philips
screw.
Pop the buttons off of the seat switch with a screwdriver.
Remove the small plastic ring around the seat back switch.
Pull the seat switch cover off.
Pull the door handle cover off the same way.
Remove the seat switch screws (2 x philips).
Remove the 10mm bolt by the door handle.
Remove the light at the bottom of the door panal by prying on one
side.
Slide the door handle towards the front of the vehicle until it comes
out of the slots. behind the door handle, pop the cable off of the
handle upwards and remove the handle.
Slide the entire door panal upwards until free (sometimes sticks on
the window seal)
Door panal needs to move upwards about 3cm until free

Also see...
http://www.peachparts.com/shopforum/showthread.php?threadid=90074