Re: Re: Re: Shifting Rod Modification
Quote:
Originally posted by R Leo
Weird. I'm kind of surprised to hear about the mods yours have needed because so far, my rods look like they're going to work fine w/o any bending or welding. I am a wee bit concerned about there being enough clearance between the driveshaft and the shifting arms where they exit the hump.
BTW-Thrash just called and the draiveshaft is ready. I'll try and get down to San Antonio tomorrow morning to grab it.
|
Could be the different tranny's. This one has the upside down reverse arm and the arms are all longer (shifter arms) than on the older cast-iron tranny.
__________________
1984 300D Turbo - 4-speed manual conversion, mid-level resto
1983 300D - parts car
1979 300TD Auto - Parts car.
1985 300D Auto - Wrecked/Parts.
=========================
"If you don't know where you are going, any road will get you there". Lewis Carrol
|