PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Alternative Fuels (http://www.peachparts.com/shopforum/forumdisplay.php?f=102)
-   -   Biodiesel processor help needed (http://www.peachparts.com/shopforum/showthread.php?t=331575)

1987_300td 12-04-2012 05:54 PM

Biodiesel processor help needed
 
I bought a Biodiesel processor over six months ago and now is the time to use it, but I can't figure out the purpose of one of the copper tube with half plastic.

The tube that is on the right side that comes out from top of heater...

http://i1234.photobucket.com/albums/...DB7C926A4A.jpg

Close up... (Also, there is thread by the valve too, as if for the water hose)

http://i1234.photobucket.com/albums/...DB858CF404.jpg

Copper goes all the way through on the inside. There is also thread on the plastic side as if a hose is to be screwed on

http://i1234.photobucket.com/albums/...DB98F05C26.jpg

Rest of the process I understood. Here are more pictures to show you the condition of the system.

http://i1234.photobucket.com/albums/...DBC30A5B6F.jpg

http://i1234.photobucket.com/albums/...DBCC1DFB9A.jpg

http://i1234.photobucket.com/albums/...DBE372CED2.jpg

http://i1234.photobucket.com/albums/...DBB7859640.jpg

http://i1234.photobucket.com/albums/...DBAD15258F.jpg

Here is where Biodiesel sits, but what is that hose on the inside?

http://i1234.photobucket.com/albums/...DBA3CECD56.jpg

grease lightnig 12-04-2012 07:48 PM

That is a GL Processor
 
You need to ask that question at the Infopop Biodiesel discussion group.

Forums

oldiesel 12-04-2012 08:15 PM

that pipe within a plastic (pvc) is a condenser usually used to remove moisture before processing and to recover some of the methanol after processing. Go to biodiesel info pop as mentioned above and read ALL of Graham Lamings writings,to get a good understanding of the ins and outs of making real bio-diesel. Your engine will love it.

bigblockchev 12-04-2012 08:24 PM

The copper pipe is for methanol recovery after processing
 
By flowing cold water through the plastic pipe connections with the processor pump running after the batch is finished the leftover methanol vapours will condense and you can drain off the condensed methanol and reuse for the next batch. The pipe inside the barrel is a standpipe , when the processed batch is pumped into the barrel the level of the bio will be higher than the pipe , you can open the valve connected to the pipe and bio will come out leaving the glycerol to come out the valve connected to the bottom plug. this is because the glycerol is more dense than the bio. Biodiesel infopop is a great resource for newbies much better than Journey to forever. Cheers Dan

Alastair 12-06-2012 04:49 PM

Looks like an 'Appleseed' thats been modded into a 'GL' processor...

That tube arrangement is the Condenser for meth recovery and somewhere on there will be the Venturi to drive it....

Lots of information on--

vegetableoildiesel.co.uk - Powered by XMB 1.9.11

1987_300td 01-04-2013 03:09 AM

Thank you everyone! I will check those out. :)


All times are GMT -4. The time now is 07:22 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website