I just installed a new deck, CD changer and 6 x 9s in my car and thought I would post how I by-passed the fader to greatly improve the sound.

First time around, I installed the stereo by wiring into the fader and felt that the sound was lacking. I quickly realized after reading here that the fader really can't handle the deck's power and needs to be bypassed. There are six wires going into the fader and I couldn't figure out which one did what so I took a different approach to solving the problem that I hope will help some other people here.

I ran new speaker wire from the rear speakers directly to the deck. Take out your back seat and carpets on the passenger side and it will be a fairly straight forward task. For the front speaker, I removed the glove box and the plastic bottom panels on both sides to be able to trace the speaker wire for the front speakers. The speaker wire goes through the center console on its way to the fader. I cut the speaker wire near the console and then spliced in new speaker wire and hooked it up directly to the deck. That way, you don't have to run new wire all the way to each front speaker.

The difference in sound was amazing. My 6 x 9s actually have some bass. I hope this helps someone else trying to figure out a way around that fader control. It's not a high tech method but it is fairly simple and works.

Scott

__________________
Scott
1982 Mercedes 240D, 4 speed, 275,000
1988 Porsche 944 Turbo S (70,000)
1987 Porsche 911 Coupe 109,000 (sold)
1998 Mercedes E300 TurboDiesel 147,000 (sold)
1985 Mercedes 300D 227,000 (totaled by inattentive driver with no insurance!)
1997 Mercedes E300 Diesel 236,000 (sold)
1995 Ducati 900SS (sold)
1987 VW Jetta GLI 157,000 (sold)
1986 Camaro 125,000 (sold - P.O.S.)
1977 Corvette L82 125,000 (sold)
1965 Pontiac GTO 15,000 restored (sold)