|
|
|
|
|
|
|
#1
09-11-2009, 10:49 PM
|
|||
|
|||
|
92 300 te help I.D. radio wires (pics)
I bought this 92 300 te with no tuner. I bought a used oem one but after install it reads E2. If you can ID the wires that seem to be in the radio wiring loom but are not connected (in my hand) I would be most grateful. Also, do the plugs and number of wires on the radio back look correct?
Anyone please. http://  http:// 
|
|
#2
09-12-2009, 07:48 AM
|
||||
|
||||
|
Looks alright, but I'm not familiar with newer radios. The extra plugs may be for external amps or a cd changer.
Take it to a dealer to get the re-set code, but before you re-install, get the serial number, you'll need that, as it wasn't installed on that car. Good luck, let us know how it turns out.
__________________
83 SD 84 CD
|
|
#3
09-12-2009, 09:08 AM
|
|||
|
|||
|
I do have the reset code and vin from the donar car. I get the E2 code. I have found the radio control unit is melted and corroded inside.
Unbelievable that with this level of engineering, there is no protection from the washer bottle!
|
|
#4
09-12-2009, 11:07 AM
|
|||
|
|||
|
Becker page
here you go, btw you have a two piece radio, front and a tuner amp in rear.
http://www.beckerautosound.com/1432-1991/index_300D.html
|
 |
| Bookmarks |
|
|
Hybrid Mode
