Headunit installation problem
 

I just bought a new Blaupunkt San francisco 300 headunit.

http://www.midwestelectronics.com/blaupunkt-san-francisco-300-p-682.html

I wired up everything and to my knowledge it is correct. I have checked for power at the plug and everything checks out as it should. 12.6V at the orange wire which is always hot. And 12.6V at the red wire which is hot when the key is on. I have checked theground between the body of the car and the radio, i get 0.00 ohms on my multimeter, so ground is fine.

I guess its a bad radio, what do ya'll think?

Most head units also have a spade-type fuse at the rear of the chassis...make sure it's not blown...