Code Wait E 2
 

Hello everybody i'm new here and got same quest. a got a 1993. 300 E and after a changed my battery mine radio asked me for CODE and i entered it and after that it keeps saying E 2 on that display somebody can tell me what this means txxxxxxxxx

ANYBODY

E2 Error
 

Hi MBZ81,
You need to check two things. 1) make sure the Tuner Pack in the trunk is plugged in properly. If you had a CD changer and it was disconnected or removed the cables may not be completing the circuit with the Head unit. 2) Check to see if you have power to the Tuner Pack. There is a fuse in the back of the Tuner Pack. Make sure it is not blown and that it has 12 volts when the system is on. Let me know how you make out. If you need more info please contact me via my Web site at: www.lajollaaudiorepair.com


Cleeve Morrison
La Jolla Audio Repair

Hi Cleeve
 

Cleeve thanks for your help i think i found the problem or maybe not, the 8 pin. cabel from te radio to amp. is damaged so can a rapair that or do i have to bay new one and where and how much is it gonna cost PS : do y have one i stock.

Cable Problem??
 

Hi Mbz81,

The cable between the Head unit and the Tuner pack normally doesn't go bad unless something is done to it. Is there a shop you can go to near you? The cable may be very expensive at the dealership. It may be possible to repair it if the problem is at the ends. The other option is to remove it (big hassle) and send it to me for testing and or repair. It would be very important to be right about your problem since you don't want to waste money and time for the wrong thing. Let me know if you need me to help further.


Cleeve Morrison
La Jolla Audio Repair

www.lajollaaudiorepair.com