Hey.

I am going to be doing the Transmission Mount on my 240D tomorrow. I went underneath the car to check how everything is put together. I noticed a cover over the mount that had 4 bolts. Then I noticed the mount bolted to the cover. What should the torque be on those two bolts ? I don't want to strip anything or screw something up.

Thank You,

Kamil

See the two holes for bolts on the lower one ? Those are the bolts I'm talking about.

__________________
Audi TT

Btw, just in case you havent thought of this..... there is a front and back to that tranny mount if you study it carefully. And it's gotta be a good idea to exactly paint mark the position of the old tranny mount bolts for exact placement that doesnt toss a wobble into the drivetrain.

The Haynes Manual says 18 ft/lbs for the bolts and 52 ft/lbs for the nut.