![]() |
People with 01 and up 210 Chasis, help needed
I had to change my deck lid. The deck lid that I had was superceeded by what I have now. On the deck lid is what I believe the call the handle. This is a plastic piece that is about 2 feet long. It sorta holds the licence plates lights in place. My old unit had 3 of those nuts that look like the licence plate fasteners. When you take out the fastners, you see 3 hex holes in the deck lid at that part. The handle screws into the deck lid via 3 screws and all 3 of them go into the hex nuts. My new one has 2 hexagonal holes and the center hole is round. The parts shop is at a loss to tell me what goes in the center hole.
I looked at the 2001 E class as far as the rear deck handle or whatever they call it is and they have 2 screws, 1 on each side and something that might be a carriage bolt in the middle. Can someone tell me what the center bolt is? It looks like a carriage bolt but I am not sure. If someone has the parts number, that would be great. |
From the EPC -
Through 99, the handle 210 758 01 38 is held by 2 screws 007985 005187 (AM5x16-A2-70) into 2 nuts 140 990 06 58. From 00 on, the handle 210 750 04 93 is held by 2 screws 007985 005187 (AM5x16-A2-70) into 2 riveted nuts 210 990 12 58 and a central screw 000 990 12 29 into a nut 124 990 04 51. I hope this helps. Sixto 95 S420 87 300SDL |
Quote:
The center hole on the handle looks like instead of having a round hole, it has a square which is what made me think carraige bolt. Anyways, the old deck lid has 3 hex holes. The parts department said that it takes 3 nuts 140 990 06 58. The new deck lid has 2 hex holes and 1 round hole. I saw the 01 210 cars and saw that the middle hole has something that looks like a carriage bolt where the top is smooth. The new handle for the 01 cars is 210 750 04 93. Once again, like you said. Perhaps tomorrow I will go get the parts you speak of and see what transpires. If I had to, I suppose I will get a new handle to go with those parts. Thise leaves 2 questions: 1. What is your source where the parts people were stumped? 2. Why weren't you behind that counter when I was there? I will go to the parts store with these numbers and maybe I can get some resolution. |
1) EPC. There's a newer version than the one I have so maybe there's later information. Ask speedy300Dturbo (or something like that) about it.
2) I was but you looked like you had a difficult parts query so I pretended to have something else to do :) Sixto 95 S420 87 300SDL |
How do I get my paws on the EPC?
|
Quote:
Sixto 95 S420 87 300SDL |
All times are GMT -4. The time now is 02:32 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website