|
|
|
#1
|
||||
|
||||
Part# needed
1985 300D, I got a little distracted yackin with my Dad while installing new rear wheel bearings and went a little tight, .002 mm. I know its prolly ok around town but fear it will get hot on the highway and I'll toast the new bearings. The regular parts guy is on vacation and the otherwise nice gentelman filling in is telling me the crush sleeve is only available in the bearing "kit". I know its available on its own, been down this road before. Thanks if anyone has the parts disc.
James Edit: just looked in the service manual and it may be called a "spacing sleeve"
__________________
*************** This Space For Rent *************** |
#2
|
||||
|
||||
Send a PM
to PEH, he just went through this.
Also, call Phil at FastLane...
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ |
#3
|
||||
|
||||
thanks, hope to get them tomorrow as I have a warm shop reserved for Saturday
__________________
*************** This Space For Rent *************** |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|