|
|
|
#1
|
|||
|
|||
Having to give it some pedal when starting...
Hey there, all.
I have to give my '79 300SD some pedal to get it started, and then have to nurse it with the pedal till it's at least a little warm in order to get it up and running. It's a bit old and tired, but aside from that does this normally indicate that the engine is not getting sufficient fuel? The PO replaced the fuel filters prior to selling it, perhaps in an effort to make it start easier. Any info you can give me will help. I know a bit about gas engines, but I'm pretty green when it comes to diesels. Thanks! |
#2
|
|||
|
|||
depends on the temp
i read the manual for the wifes 240d and it stated that aro 32 you should turn the idle screw up half and push the accelerator down once.
under 20 turn the screw all the way and pum thrice. under zero the book suggested using a block heater. so maybe it is normal.
__________________
currently [1981 300 td tdidi 165500 dark brown/palamino-Brownie-mine-3k miles of ownership 1983 240d 162+++ Anthricite grey w/ henna red interior and hella lights-wifes car-Red the above two cars are for sale and can be seen on the cars for sale thread here. pix also available. 240d-144+ Manilla Yellow w/ palmino interior-greasecar kit-Blondie-the college kids car 23" gt 21 speed still on original tires-still got the nubs 21" khs tandem |
#3
|
|||
|
|||
How is the warm idle speed? If it's a bit low, it will be a bit lower when cold, so 'nursing' it will work. Won't hurt the engine, but means it wants the fuel rack to be moved a bit to give a bit more fuel.
I don't thing it's filters, that would affect you more at higher power. How are glow plugs? They will also help the car start better. Best Regards, jim |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|