|
|
|
#1
|
|||
|
|||
Rear trailing arm bushing selection?
I am going to replace the rest of the old bushings in my '84 300D suspension and I need to know what trailing arm bushings are needed. Fastlane offers two different types. One type is listed as with "eccentric interior bushing" and the others without? Help, whats the difference? Thanks, RT
__________________
When all else fails, vote from the rooftops! 84' Mercedes Benz 300D Anthracite/black, 171K 03' Volkswagen Jetta TDI blue/black, 93K 93' Chevrolet C2500HD ExCab 6.5TD, Two-tone blue, 252K |
#2
|
||||
|
||||
Quote:
The eccentric bushings are only for use in restoring the alignment of vehicles with damaged subframes or subframe mounts. The alignment procedure requires a unique fixture to hold the subframe when it is removed from the vehicle.
__________________
Never a dull moment at Berry Hill Farm. |
#3
|
|||
|
|||
Thank you! RT
__________________
When all else fails, vote from the rooftops! 84' Mercedes Benz 300D Anthracite/black, 171K 03' Volkswagen Jetta TDI blue/black, 93K 93' Chevrolet C2500HD ExCab 6.5TD, Two-tone blue, 252K |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
trailing arm bushings | morris | Tech Help | 0 | 06-15-2004 09:55 AM |
Two piece or Three piece lower control arm bushing? | RunningTooHot | Diesel Discussion | 0 | 11-01-2002 01:34 AM |
rusted rear trailing arm 300SD | James L | Diesel Discussion | 3 | 06-14-2000 09:54 PM |
'90 300se Rear Sags | kevinjh | Tech Help | 4 | 05-09-2000 09:32 AM |
REAR TRAILING ARM | j22182 | Tech Help | 0 | 01-24-2000 03:29 PM |