|
|
|
#1
|
||||
|
||||
Removing part of OM606 intake manifold
can anyone enlighten me on how to remove the part of the air intake that lays accross the top of the engine from the section the EGR connects to the intake manifold? I see 2 bolts on a support bracket at the 'left side' (next to the EGR section) and one bolt attaching it to the intake manifold on the 'right'.
I undid these and tried a bit of wiggling but didn't want to break anything...
__________________
1993 320TE M104 --------------------------------------------------- past: 1983 230E W123 M102 1994 E300D S124 OM606 (x2) 1967 250SE W108 M129 1972 280se 3.5 W108 M116 1980 280SE W116 M110 1980 350SE W116 M116 1992 300E W124 M103 1994 E280 W124 M104 ---------------------------------------------- "music and women I cannot but give way to, whatever my business" -Pepys |
#2
|
||||
|
||||
You are doing it exactly right. You can use a flat haed screw driver to pry it loose under the area where there is the single bolt. It's on there tight as the rubber o-rings hcreate a good seal. When replacing them I smeared some grease on the o-rings so tha they slide on and off easily.
__________________
#dieselFLEET --------------- '97 E300 '99 E300 |
#3
|
||||
|
||||
__________________
01 Ford Excursion Powerstroke 99 E300 Turbodiesel 91 Vette with 383 motor 05 Polaris Sportsman 800 EFI 06 Polaris Sportsman 500 EFI 03 SeaDoo GTX SC Red 03 SeaDoo GTX SC Yellow 04 Tailgator 21 ft Toy Hauler 11 Harley Davidson 883 SuperLow |
#4
|
||||
|
||||
thanks. I did see that glow plug link but I think the later 606 engines have a different air intake? I may be wrong...
__________________
1993 320TE M104 --------------------------------------------------- past: 1983 230E W123 M102 1994 E300D S124 OM606 (x2) 1967 250SE W108 M129 1972 280se 3.5 W108 M116 1980 280SE W116 M110 1980 350SE W116 M116 1992 300E W124 M103 1994 E280 W124 M104 ---------------------------------------------- "music and women I cannot but give way to, whatever my business" -Pepys |
#5
|
||||
|
||||
You asolutely correct. The 98 and 99 turbo models do not have the part of the manifold that crosses back over the engine to the air box. Instead it connects to the pipe coming from the intercooler which runs up from the driver side bumper.
__________________
2002 G500 74K 1998 E300 200K and rising 1995 S600 73k "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem."-Ronald Reagan "Never tell people how to do things. Tell them what to do and they will surprise you with their ingenuity."-General George S. Patton |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Oil In The Manifold Intake Of 190e, 2.6l.1988 | MARIO FARIAS | Diesel Discussion | 4 | 12-22-2003 01:03 PM |
126 Intake Manifold Leak | Theurig | Tech Help | 0 | 12-12-2003 10:09 PM |
M103 - Intake manifold | BlackBeauty | Mercedes-Benz Performance Paddock | 2 | 12-10-2003 09:18 PM |
Intake, Exhaust Manifold available -300d cali model | adamb | Diesel Discussion | 2 | 10-12-2003 09:23 PM |
Need help identifying a part on intake manifold | rickjordan | Diesel Discussion | 2 | 03-03-2001 10:44 PM |