|
|
|
#1
|
||||
|
||||
'94 Om606 Egr
I know this subject has been done to death but in searching I still don't seem to have found a definate answer- can you disable the EGR on the early versions of the N/A OM606 by just plugging the vacuum line to the valve? (there is no sensor on the valve, same as the '95 606's you got in the states I believe)
cheers
__________________
1993 320TE M104 --------------------------------------------------- past: 1983 230E W123 M102 1994 E300D S124 OM606 (x2) 1967 250SE W108 M129 1972 280se 3.5 W108 M116 1980 280SE W116 M110 1980 350SE W116 M116 1992 300E W124 M103 1994 E280 W124 M104 ---------------------------------------------- "music and women I cannot but give way to, whatever my business" -Pepys |
#2
|
||||
|
||||
bumpety-bump...
__________________
1993 320TE M104 --------------------------------------------------- past: 1983 230E W123 M102 1994 E300D S124 OM606 (x2) 1967 250SE W108 M129 1972 280se 3.5 W108 M116 1980 280SE W116 M110 1980 350SE W116 M116 1992 300E W124 M103 1994 E280 W124 M104 ---------------------------------------------- "music and women I cannot but give way to, whatever my business" -Pepys |
#3
|
||||
|
||||
Not sure on the 94, but if you disconnect the vacuum lines, it will throw a code. Best bet is to check out the fresh air mod.
http://www.peachparts.com/shopforum/showthread.php?t=78476&page=2&pp=15&highlight=egr+606
__________________
2002 G500 74K 1998 E300 200K and rising 1995 S600 73k "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem."-Ronald Reagan "Never tell people how to do things. Tell them what to do and they will surprise you with their ingenuity."-General George S. Patton |
#4
|
|||
|
|||
Have just plugged the egr vacuum line on my '95 606 for test purposes after I cleaned the intake 22k mi ago and no problems. I expect that this will be an extended test..
Bill
__________________
Bill Brune 86 190D 2.5 5spd 314k 87 190DT 150k 87 300SDL 357k 95 E300D 115k 02 Jetta TDI 90k 99 Subaru Legacy |
#5
|
||||
|
||||
On my '97 I can't plug the vacuum line as the engine runs differently and throws a CEL. Re-routing the tube coming off the manifold going into the EGR was the ticket for mine. Everything is still functional and the EGR now draws fresh air
__________________
#dieselFLEET --------------- '97 E300 '99 E300 |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
EGR blocked | Jassper | Diesel Discussion | 32 | 02-12-2008 07:44 PM |
E300 EGR questions | oldsouth | Diesel Discussion | 3 | 04-19-2004 02:14 PM |
OM606 non-turbo EGR mod link | michakaveli | Diesel Discussion | 24 | 01-28-2004 05:24 PM |
OM606 non-turbo EGR mod link | michakaveli | Tech Help | 0 | 01-26-2004 10:25 AM |
EGR disabled... my thoughts and 1 ? | JHZR2 | Diesel Discussion | 9 | 09-23-2003 10:29 PM |