|
|
|
#1
|
|||
|
|||
Looking for hp/bhp/torque ratings on the 300SD motor from 1981-1985, numbered 617.
Also looking for what the transmissions (auto) part numbers are that would work with this motor. thanks! |
#2
|
|||
|
|||
According to the owners manual for the 1983 300SD the output according to SAE is 120 net-bhp@4350rpm. Torque is not listed, but I believe it is adaquate.
Bill Lewallen Lexington,Ky. |
#3
|
||||
|
||||
Here is a MB diesel spec sheet that I ran across recently. It's not completely accurate, but it's still a good guide.
http://www.wagoneers.com/DieselBenz/mercedes-diesels.html
__________________
1980 Mercedes 240D 1982 Mercedes 300SD 1985 Mercedes 300D 1993 Dodge Cummins Turbo Diesel |
#4
|
|||
|
|||
There are slight variations depending on chassis.
All models:1978-84 Bore/stroke: 90.9/92.4 Total eff. piston displacement in cc:2998 compression ratio: 21.5:1 Max. engine rpm (no load): 4900-5200 W116 Engine output: KW/rpm: 85/4200(other models:89/4350) SAE net bhp/rpm: 110/4200 (1980:120/4350) other models: 170/2400 W116 Max. torque Nm/rpm:235/2400(other models:250/2400) SAE net lbf-ft./rpm:168/2400(1980:170/2400) other models:170/2400 |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
W123 blower motor brushes -- any interest? | Maki | Diesel Discussion | 18 | 11-28-2011 05:34 PM |
White Stuff under the Blower motor regulator. | Merc1 | Tech Help | 5 | 08-13-2005 05:31 PM |
W201 blower motor replacement lessons learned | 73MB280SEL | Diesel Discussion | 0 | 08-14-2004 09:55 PM |
Engines Vs. Motors | Snibble | Off-Topic Discussion | 39 | 07-28-2003 11:41 PM |
Need MB motor HP and Torque ratings | 280GE | Tech Help | 1 | 12-14-2000 03:51 PM |