83 300SD AT B-1 Reaction Valve Seals a DIY?
Posted in the Diesel board wrt leaking cover at B-1 Reaction valve. Helpful poster(s) ID'ed the valve cover, and pointed out seals on valve assy are the likely leak source.
Car is a 1983 300SD, auto transmission. Is there anything special about removing the valve and either exchanging with a new valve or exchanging the valve seals (o-rings) and plastic end cap? For example, does orientation (axial rotation) matter? What is the torque spec for the cover/cap -- I couldn't get the cap (12mm in-hex fastener) to rotate. |
Removing that allen plug is the hardest part. After that you will need to PULL out the reaction valve & install the 2 o-rings. USE vasoline to secure the guide pin!
|
All times are GMT -4. The time now is 05:35 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website