|
|
|
#1
|
|||
|
|||
how to prime
how do i prime the injecter pump on a 1984 190d
|
#2
|
||||
|
||||
Hold the pedal to the floor and crank for 30 seconds at a time. I think the manual says to crank for a minute at a time.
Sixto 95 S420 87 300SDL |
#3
|
|||
|
|||
prime with mity vac
My hand primer had no resistance, and thinking i might have a bad lift pump (the part that the hand primer is on), I scored one from a 77 300D at the boneyard-same problem. I rented a Mity Vac @ Autozone for $50, plugged the needle valve that came with it into the clear hose that runs from fuel filter housing to the back of the IP, and pumped. Man, did that thing pull-first the air in the system and then fuel through! I still had to crack all the injectors, have my son crank the engine, and tighten injectors, but that was the only thing that would start a prime. Now my hand primer works like it should. Give this a try-good luck!
__________________
1983 300TD, white, 240k PAY TAXES ON ELECTION DAY! |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Prestart oil prime of a long storage engine can save your bearings and bank account. | whunter | Diesel Discussion | 24 | 01-04-2013 01:03 AM |
help...any way to prime ip with bad hand primer? | skinnedknuckles | Diesel Discussion | 20 | 03-25-2005 10:32 AM |
fuel system prime prior to start | slfan | Mercedes-Benz SL Discussion Forum | 2 | 04-17-2004 06:25 PM |
Prime Time!! | daddiojiggy | Tech Help | 6 | 03-20-2004 09:30 PM |
red alert prime | RROSIN1 | Diesel Discussion | 8 | 06-11-2003 02:43 PM |