|
|
|
#1
|
||||
|
||||
Overboost Switch? 92 300D 2.5 (602 engine)
While removing the line from the ALDA to make sure it was clear, I broke the plastic nipple off of the sensor at the other end. Is this the overboost sensor? The Alldata sheet shows the part as B5/1 and the MB number on it is 010 542 68 17. It has one pressure line going in, nothing coming out and a 3 pin connector. Located on the passenger side rear engine compartment wall. Dealer item only? I didn't see it on the parts page.
Reid
__________________
Reid Past ('59 220Sb, 2-'59 190's, '92 300D 2.5T) Current '04 E320 4Matic Wagon '00 E320 4Matic Wagon |
#2
|
||||
|
||||
Pressure Sensor EDS
Be really careful removing Oetiker style crimp-on ear clamps on vacuum and pressure lines. I like them better than the sloppy looking Gates screw clamps for vacuum lines but if you twist them with side cutters to remove them, you risk breaking the part that the hose is attached to. I was holding the hose with pliers and didn't think there was any twisting force on the sensor. I epoxied the nipple back on and it looks good - meanwhile I'll order another sensor.
Reid
__________________
Reid Past ('59 220Sb, 2-'59 190's, '92 300D 2.5T) Current '04 E320 4Matic Wagon '00 E320 4Matic Wagon |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
EGR crossover switch and engine miss | jerryg | Tech Help | 6 | 11-17-2003 09:07 PM |
'92 300D 2.5 Turbo FS, Fair Price? | hitch02 | Diesel Discussion | 2 | 08-18-2002 09:32 PM |
300d 2.5 engine drip tray wanted | msethk | Site Feedback | 0 | 07-26-2002 02:21 PM |
1991 300D 2.5 Turbo for Sale - Has new engine | athan01 | Mercedes-Benz Cars For Sale | 1 | 03-15-2002 12:56 PM |
Free Engine & Trans 1982 300d | DZLPWR | Diesel Discussion | 4 | 03-12-2002 11:01 AM |