|
|
|
#1
|
|||
|
|||
300SD part id and how remove
I am attempting to r an r the shut off diaphram. There is an electrical attatchment right next to the shut of diaphram (toward the front and I need to remove it so I can get at the inside 10mm bolt and remove and replace the new diaphram. Seems as if that would have to be removed before unscrewing the ALDA.
New Subject: Where should the alda be set, I unscrewed the adjustment by accident and would rather set it now than sneak under there to adjust it with the manifold on... 1993 300SD....thanks |
#2
|
||||
|
||||
I've replaced the shutoff diaphram in my SD. I don't recall anything being in the way at all.
Woops, you have a 603; different IP.
__________________
Michael LaFleur '05 E320 CDI - 86,000 miles '86 300SDL - 360,000 miles '85 300SD - 150,000 miles (sold) '89 190D - 120,000 miles (sold) '85 300SD - 317,000 miles (sold) '98 ML320 - 270,000 miles (sold) '75 300D - 170,000 miles (sold) '83 Harley Davidson FLTC (Broken again) :-( '61 Plymouth Valiant - 60k mikes 2004 Papillon (Oliver) 2005 Tzitzu (Griffon) 2009 Welsh Corgi (Buba) |
#3
|
||||
|
||||
Michael, note that it's a 93 300SD.
Sixto 95 S420 87 300SDL |
Bookmarks |
|
|