Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-07-2005, 05:59 PM
Registered User
 
Join Date: Sep 2005
Posts: 11
83 300sd motor knocking

I had the injectors checked they are good two are ok. there is still a knock. It is running rough and I diconnected each fuel line to see if the knock when away. It didn't the knock gets louder as you speed up the motor. oil pressure is fine. it had been running fine untill this. one day it just died and would not start back up the MB shop put in new glow plugs and now it have a knock. there is some white smoke going from the oil fill hole when you remove the cap it will keep kicking out smoke as long a the motor is running and it puts out alot of black smoke from the tail pipe. Did it jump time? will it even run if it jumps time? from what I can see the chain looks fine it has about 220,000 mile on it. can I run it at idle with the valve cover off to see what I can or will that break something? I have been told it could be rod bearings. I don't see any metal in the oil. also told it could be a bad injector. also how do you do a compression test on a deisel since there is no spark plug hole? do you remove the injector? and what should the compression be? could it be a bad valve or spring the noise is pretty loud. I am just out of ideas and may be lokking for a motor even though I hope I don't have to.

Reply With Quote
  #2  
Old 09-07-2005, 11:00 PM
t walgamuth's Avatar
dieselarchitect
 
Join Date: Apr 2005
Location: Lafayette Indiana
Posts: 38,632
a lot

of questions. compression is through the injector holes. since it ran fine before they changed the glow plugs....it is a long shot but perhaps they broke one off getting it out and the end fell into the combustion chamber and bent a rod. i had this happen on a 6.2 chebby once. it will knock and shake with a bent rod. very loud too.

tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.
Reply With Quote
  #3  
Old 09-08-2005, 12:19 AM
Registered User
 
Join Date: Aug 2005
Location: Northwest
Posts: 48
I think...

I think its a bad prechamber. Someone responded to this before. Have a shop check to see if your prechamber are cracked or broken.

This could cause this noise.

How many miles on the car?

__________________
Ryan
1985 300D Turbo Diesel
1984 200 Euro
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
1983 300sd $1900.00 !!!! KYCOL Diesel Discussion 0 05-09-2004 03:56 PM
rear glass 300SD shadetree77 Diesel Discussion 3 08-15-2003 01:49 AM
W116 300SD and W126 300SD comparison? ericnguyen Diesel Discussion 11 07-11-2003 01:11 AM
Desperately Seeking a 300SD!! diesellady Diesel Discussion 14 08-28-2002 01:19 PM



All times are GMT -4. The time now is 05:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page